Photo Transfer onto Glass
Image transfer is one of my favorite, favorite things.
I have done image transfer many times, onto wood, canvas, and fabric, but this is the first time I attempted to do a photo transfer onto the glass.
I love how this project turned out, mostly because I am in love with this photo, but also because image transfer is really cool on glass.
It is easy to accomplish. Seriously.
How To Transfer a Photo onto Glass:
Supplies:
- Omni-Gel 8-Ounce Transfer Medium
- Painter’s Tape
- Glass Pane (I used glass from a picture frame)
- Photo–from book, magazine, or printed on laserjet printer
- Wet Wash Cloth
- First, tape your glass down to the surface you are working on. This will help you center your photo transfer, protect you from the sharp edges and keep the glass in one place while you work on it. Then, cover the face of the picture completely with the transfer medium. *Note, please keep in mind that this image transfer will be the reverse of the original, so don’t choose something that will look strange backward.
- Next, place the photo face down onto the glass. With the pads of your fingers, pressed down all parts of the photo and try to rub out any air bubbles or globs of gel.
- Allow to dry completely. When it is dry, begin to remove the paper. The image will remain in the dried transfer gel. Use the wash cloth to soak the paper, and then start rubbing…and rubbing and rubbing until all of the paper is removed. This process takes some time! The paper comes off in layers, so let it dry and then come back to it and keep rubbing off the paper.
Frame and display!
One of the things I love the most about photo transfer is that it has an old-time rustic look, which is why I wanted to do a photo transfer of this photo.
Give photo transfer a try–and I’d love to know how your project turns out!
This is fantastic! I’d love to give it a try!
I’ve been trying to transfer a photo onto a glass bottle. I’ve done it 3 times but the photo won’t stick it transfer and rubs off and I’m not rubbing hard at all. I’m frustrated. I think because I tried to do it with mod podge matte. Could this be what I’m doing wrong? Thank you for your video. Thank you for your help.
Wow. Very well explained
Does a laser jet printer have to be used or will this work also with an ink jet?
How long does the gel take to dry?
Thanks!!!
thank you for sharing, I will try this…
Why is the photo all scratched up? Did you do that on purpose or was it part of the process?
Ahh..what a lovely idea. I would never have thought of this. I’m going to see if I can make something for my grandmother.
I was wondering if you could use inkjet water slide paper. I only have an inkjet printer.
You can try…but I think the ink will smear.
I have great success using inkjet water slide paper on glass.
Just make sure it is inkjet water slide paper.
Go slow and make sure all bubbles are removed.
Outstanding article, thank you so much for sharing this article. Embroidery Packs
Do you have a video of this process? I would love to view it!
not at this time.
I would also like to see a video of this process. If you could and would consider making a video of this process I think it would be interesting, even MORE informative, and be very helpful. Thank you. I too have wanted. to have photos printed on glass but this might be a more affordable way to put a photo on to glass. Also if a person has an image they want to print to. transfer onto glass, when they print it there is a way to mirror an image (basically printing the image . backwards) in the case of having text in the picture so as to have the text in the final product be turned correctly. Thanks again for a very interesting project.
I tried this on a mirror and on mine even after i rubbed all the paper off, the white paper that had gel medium on it stayed on their with the image… It looks like the gel dried white and became part of the image. Any suggestions how to just get the image to stay and not the ‘white border’? I can send a picture if this doesnt make sense. Thanks!
Quick question. I have read a few blogs/how-tos on photo transfer to glass and all of them say to use a laser jet printer. Can you explain why? I am just curious as to the reasoning.
Thank you!
images printed on an ink jet printer will smear once they get wet.
Thank you for sharing your photo transfer. I found your information on the Homestead ad on FB. I was wondering if you would like to do some blog sharing/hopping? I am new at the blogging and would love to learn more about how you went about your blogging.
Thanks so much and I will not put my website on here unless you ask me to share it.
Andrea
Thank you for sharing your photo transfer. I found your information on the Homestead ad on FB. I was wondering if you would like to do some blog sharing/hoppinig? I am new at the blogging and would love to learn more about how you went about your blogging.
Thanks so much and I will not put my website on here unless you ask me to share it.
Andrea
Could u please make a video? I don’t want to mess it up ..
I just finished a photo for my sons wedding (loved doing it) but did you put any thing on the back of your picture when finished to seal it?
I usually just put a coat of matte mod podge. Sounds like a cool project!
Have you ever tried to transfer to eye glasses lens? I am trying but cannot figure out how to work with the curve.
What a cool idea! I haven’t tried this myself, so I have no tips. Maybe get the paper wet first?
I found this site while researching ways to transfer pictures to mirrors. I etch glass and have been asked if I can do mirrors,but I needed a way to get the pic onto the mirror to etch. I was wondering if you thought this might work for that, because the picture wouldn’t be left on it after I’m done at least not the printed one anyway. I would greatly appreciate your imput on this. If you have any other suggestions I’m all ears. Thanks for your help and imput in advance.
Sounds like a really cool project, but I am totally clueless when it comes to etching. So sorry!
Is the process the same for photo transfer onto a *mirror*??? If so, I want to do it as a decor for our wedding. Thanks in adv.!!
Yes, it would be absolutely the same! What a cool idea!
Do you have a blog on utube showing how to transfer photos onto glass? I see this one but I would like to see a demonstration. I have a old door with a window I’m going to make into a wall hanging/ coat rack and add a few other things to it. It would be wonderful if you could show me how to do this. Thank you.
Sounds like a really cool projects. I don’t have a video at the moment, but I’ll work on one and let you know when it is ready.
hi!! I was just wondering where do I go to find that certain gel medium? Or will any gel medium work? Thank you?
No problem! There is a link to the stuff I used in the supply list above. You can also find it with the glue at any craft store. Best of luck!
Hi, Nancy! I was wondering if you knew the couple in the photo? Because I was suprised when I saw it on my Facebook it is a photo of my husbands grandparents.
That is so wild! I actually fond this pictures in a National Geographic book entitled “Love”, so something like that.
[…] When trying to come up with some inexpensive Christmas gift ideas, I came across this wonderful idea to share some of our old family photos that we found in our attic recently. With just a few supplies that I already have and a trip to my local craft store, I can scan in my family photos and make unique hand-made gifts for our family this year. Looks easy enough that my kids can help out too! No more sweaters for grandma and tacky ties for the uncles this year. I might also cut out a few pictures of my daughter’s favorite soccer players and make a collage for her room. I can’t wait to get started! Click here to read full article […]
[…] Photo Transfer onto Glass […]
I was looking for something like this to try for a vintage decoration for the lanterns we are using for her wedding. I wanted to incorporate some old pic of family that has passed away. We wanted to have the feeling that they are still with us and what better than to have older pics of grandparents and famliy that has passed in formal attire placed on tables . Im hoping it works out.
What a wonderful (and really cool) idea. I hope it works out!
[…] How To Transfer A Photo Onto Glass […]
I think this is the solution for me to display photos in some old windows for a gallery wall. Neat idea, and it appears easy enough for a “craft challenged” person like me! I’m going to give it a try…perhaps a couple of test runs on some glass I don’t minfd messing up with phots I don’t mind jacking up. If you knew me at all, you would jnow that jacking up seemingly easy things is what comes natural to me! 🙂
I’m great at over-complicating things too! Best of luck with this project–and don’t get discouraged at the rubbing-paper-off stage. It can take awhile!
[…] case you’ve missed it, I’ve already transferred photos onto canvas, fabric, wood and glass. I also did a reverse photo transfer with watercolor. I love all of these projects, and […]
I am guessing that you cant just use a normal photo.
It can be any photo, as long as it’s printed with a LASER printer.
I am guessing that you just cant use a normal photo.
Can you use a photo printed on photo paper?
No. It has to be on regular paper. Part of the process is rubbing off the paper and leaving the ink behind, so photo paper would not work.
My daughter did this on an 8×8 artists canvas as a Christmas gift for us this year. She actually used tissue paper (gift wrapping tissue) that she taped to a regular sheet of paper so it would make it through the printer. Then removed it and just proceeded with the tissue paper image. And she used our inkjet printer. It came out great!
Thanks for taking a minute to share this tip! I have yet to try a photo transfer with tissue paper, but I can see how it would be a great thing to do. Definitely on the to-do list!
This sounded like a great idea, but after reading the comments, it sounds as if there are more fails than successes. Guess I won’t waste my time with this project. I thought you could just use any photo, but apparently, it must be a laser printed photo, so unless you have a laser printer handy, it probably won’t work very well. Too bad. Looked like a fun project.
Your local library is bound to have a laser printer that allows the public to enjoy for a small fee.
Yup! that is where I get all of mine printed. Great tip!
Your local packaging company ( like ups…) will usually have a laser printer,we have an independant pkg. company here,the picture copies were like .58 per 8 x 10 sheet, so 2.00 for pics, 3 – 4×6, on 3- 8×10 sheets for a total of 9 pics,not bad really…room for error is always a plus in the trial stages of any project
Awesome! Great tip. Thanks for sharing!
An inexpensive source for standard-sized small pieces of glass would be your local thrift store on ‘sale’ day…snap up those cheap ugly frames and just use the glass…it’s bound to be less expensive than going to a frame shop and having it custom cut.
Great tip! Thanks!
Yard sales and resale shops!
[…] Transfer Medium Transfer- […]
Just a question, would this technique work on candles?
I thought to myself, if this works on candles it would make excellent table settings or as bonbonnieres at weddings
christening etc…. as candles are quite inexpensive items these days.
This technique works on almost any medium…so it MIGHT work on a candle. Not sure how the wax would factor it, but since candles are cheap, I say give it a try—and let me know after you do!!!
What am I doing wrong? A lot of paper won’t peel from glass and when I keep trying it puts a hole in the picture
Let the paper soak for a while. and then very gently rub with the pads of your fingers. I hope that helps.
Thank you. I will try that once I get more pictures printed off. I have messed up 4 but I am determined
Just a question, would this technique work on candles?
I thought to myself, if this works on candles it would make excellent table settings or as bonbonnieres at weddings
christening etc…. as candles are quite inexpensive items these days.
Can you use a blow dryer or bake the glass to speed up the drying time?
that is an interesting idea. I have never tried it, so I can’t say. But, I’m not sure it’d be a good idea since the process is already a little delicate.
It worked. It turned out beautiful. Thank you so much for this idea.
yay! I am so thrilled to hear that! And, thanks for stopping back and letting me know.
Did you blow dry or bake it
I just let it air-dry over night.
I wondered this too if it would be able to be washed? Also, do you think it would fade easily in the sun? I was thinking of doing this on something that would be outside….do you think that would be a good idea?
Although it is a cool effect it isn’t the toughest thing. I wouldn’t wash it, but I *think* it would be fine with the sun. I hope that’s helpful!
This is so cool! I can’t wait to try this. Do you think it would work on a glass plate? For display or gentle hand washing? I’d put it on the bottom of a clear glass plate…sure wouldn’t want someone to “eat a photo”… *giggles*
After reading your fun post I set out on a mission to create awesome stuff but it hasn’t worked out and now I’m sad 🙁 The back of the MOD PODGE packaging goes through a process of creating a decal by using wax paper, huh??? You made it look so easy. Any tips? I can not get a single image to transfer to glass. I am using regular copy paper, laser toner, MOD PODGE Photo Transfer Medium and glass.
Even though this was posted several months ago I will offer up some advice for anyone who stumbles upon this. The method that I used and worked for me was I applied a layer of gel medium to the piece of glass then applied a layer a gel medium to the photo. Layering the gel medium is the key. One layer just doesn’t seem to cut it. Once the layers were applied I merged the two together and smoothed out the air bubbles using an old gift card I had laying around. When I finally got all the paper bits off there were very few spots of the image that were not transferred. To seal it I used a spray sealant
I would also like for people to know you don’t have to use the Mod Podge brand. There are other gel mediums out there. I used a gel medium made by Liquitex that I got for half off because I used a coupon from the craft store. Do not hesitate to experiment until you find the method that you think looks best! 🙂
Hi, Nancy. What do you know about making a tintype? Is it a similar process? Can you do a blog enter on doing one? Thanks!
I love this idea and am currently working on a wedding gift for this upcoming weekend. I’m transferring photos to an old window. All of them worked great besides one. I am having trouble getting the back rubbed off of one. It is very pale right now and has a pink tint. I can tell there is still paper on there but can’t get it to peel, Any advice? Also if I can’t get it to work is there a way to remove the entire image and start this pane over? I’m kind of in a time crunch been working on this for a few days now.
zendesk.com
Photo Transfer onto Glass – Do Small Things with Love
How do I subscribe to your (fabulous) blog via email?
chauffeur perth
Photo Transfer onto Glass – Do Small Things with Love
This is great. A lot of your crafts have come up in my pins so I feel like I’m stalking a little bit too! I have the transfer gel and keep looking around for new things to try… empty jars, old wooden furniture… so many things, so little time.
Try a photo transfer! It really is one of the coolest things ever! And, if you do, please share a photo with me 🙂
Nancy!
I’ve been stalking your site! I can’t wait to try some of these projects, if they turn out, I’ll post them and link back to you -thanks for the inspiration!!
-Emily
I love it when people blog-stalk me! Have fun with what you found here and please, send me links! Can’t wait to see how your projects turn out!
I have attempted this on a glass bottle but when it came to getting the paper off (8+ hours later) the whole picture peeled off. I basically had a homemade bumper sticker!! What am I doing wrong? I need help! First try at this craft.
Thanks
Kirsty x
UK
Wondering if an inkjet printer will work?
Hello! Thank you for sharing! I have never done such transfer but do you know how durable and practical this is? Does the image come off with a scratch? Im thinking mostly about jewlery.
Thanks
Just as it is written here, it is probably not strong enough for jewelry–but if i were you I would just give it a few coats of Mod Podge. That should do the trick. I’d love for you to send me any picture of finished projects. Sounds cool, what you are planning!
i was wondering if you can just use a regular photo to do this ?
You can use any picture, as long as it is printed with a laser jet printer on regular paper. Also, since the transfer is never perfect, I have better luck with less details pictures. Good luck!
Hello Nancy, I tried this the other nite and I guess I rubbed too hard because I started to get parts of the picture peeling off too. It looked fine until it started to dry and that is when I noticed the pic was rubbing off too. Any suggestions? Thanks
Here’s the thing about photo transfer–it is never going to be perfect. You can see in mine that there are streaks where picture rubbed off. For that reason I shy away from doing close-ups for people faces, because if an eye rubs off, it looks weird. Also, try using the Mod Podge image transfer gel. I’ve had the best luck with that. Good luck!!
I tried doing this, but the paper did not stick to the glass. I am attempting it onto a wine bottle. When I was rubbing the paper off, chucks of the paper were just coming off with no transfer! What am I doing wrong? Thanks, I love the project and hope to be able to do it!
Hummm, first off, try using the Mod Podge brand of image transfer gel. I’ve had the best luck with that. Next, it is super important that when you put the gel on the paper, and the paper on the glass that the entire image is covered. Then, I usually spent some time gently rubbing the back of the paper to get all of the gel blobs out. You want a nice even coat. I’ve also had issues were if a tiny section of the gel dries before is get to the glass the image will not transfer. I hope some of that helps, and that you have some success. Sounds like a cool project!!
Trying to do this to a christmas ornament but can’t get it to work. What kind of paper? regular photograph?
I’m so glad you are trying it…and what a cool idea to do it on an ornament. You want to use a picture that is printed with a laser jet printer on regular paper. and, be warned, it takes some time and effort to get all of the paper off.
Very cool!
Great idea! Thanks!
I’d Like To Try This On Maybe A Glass Vase, When Giving Flowers As A Gift. I Wonder If It Will Be Ok When It Gets Washed?
If you cover the picture with some sort of sealant (or even a glue or some sort that isn’t washable) it should be perfectly fine.
I’d Like To Try This On Maybe A Glass Vase, When Giving Flowers As A Gift. I Wonder If It Will Be Ok When It Gets Washed?
I’d Like To Try This On Maybe A Glass Vase, When Giving Flowers As A Gift. I Wonder If It Will Be Ok When It Gets Washed?
I’d Like To Try This On Maybe A Glass Vase, When Giving Flowers As A Gift. I Wonder If It Will Be Ok When It Gets Washed?
I’d Like To Try This On Maybe A Glass Vase, When Giving Flowers As A Gift. I Wonder If It Will Be Ok When It Gets Washed?
by hand not in dish washer
Ah This is so cute! I am going to try it on some old windows I have! If you get a chance, would you link this up to our blog hop? I think our readers would love it as well! Thank you!
xoxo, Jordan
http://www.lilywhite-designs.com
Very cute! Great job. I love photo transfers! I need to get to work on a photo from our wedding. Stop by my Friday’s Five Features and link up this post (and others)! http://diy-vintage-chic.blogspot.com/2013/08/fridays-five-features-no-3.html
Nancy, this is a very cool craft. Love the pic, reminds me of some from my family. Found your post on Strut Your Stuff Saturday.
Please stop over and link at our SUPER SUNDAY Link Party, our readers would enjoy this also. Runs now through Tuesday evening.
Lori
Who Needs A Cape?
Not Your Average Super Moms!